-
SubscriptionSubscription
We will irregular release Chroma solutions, technics, exhibitions, seminar and webinar news. Subscribe today to get more information.
-
0Inquiry Cart
Quick Menu
Partial Discharge Tester
Partial Discharge Tester
Model 19501-K
- Built-in Hipot test and PD detector function in one instrument
- Programmable voltage output: 0.1KVac~10KVac
- PD (Partial Discharge) detection range: 1 pC~2000 pC
- High accuracy and resolution current meter: 0.01uA~300uA
Partial Discharge Tester
Model 19501
- Separate design for AC high voltage output with PD measurement and mainframe
- Built-in regulation test methods
- 3-stage voltage testing method
- PD failure count setting (1-10)
- Application: IGBT, SiC-MOSFET, photocoupler, digital isolator, isolated control IC, isolated D/D power, small/large transformer, motor.
Lead-acid Battery Cell Tester
Surge Tester
Model 19311 Series
- Max. output voltage: 6kV (Depends on DUT's capacitance)
- Pulse interval: 30ms - 3000ms
- 8 types of judgements
Electrical Safety Analyzer
Wound Component EST Analyzer
Model 19036
- 5 in 1 composite analyzer scanner (ACW/DCW/IR/IWT/DCR)
- Hi-pot test (5kVac / 6kVdc, HSCC, 500 VA output)
- 5kV Insulation Resistance test (IR)
- Impulse Winding Test (IWT)
Electrical Safety Analyzer
Model 19032/19032-P
- 5 In 1 (ACV/DCV/ IR/GB/LC Test)
- 500VA Power Rating
- Twin-Port function
- Open / Short Check(OSC)
Wound Component EST Scanner
Model 19035 Series
- 4 in 1 (AC/DC/IR/DCR Test)
- 8 Channel Scanner
- 5kV Insulation Resistance test
- High speed contact check
Hipot Tester / Safety Tester
Multi-Channel Hipot Tester
Model 19020 Series
- 10 channels in one device
- 10 sets of sync output and measurement
- ACWV, DCWV, IR 3-in-1 EST test
Hipot Tester
Model 19052/19053/19054
- 3 In 1 (ACV/DCV/IR Test)
- 8 / 4 channels scanner
Hipot Analyzer
Model 19056/19057 Series
- Up to 10kV AC & 20kV DC
- Provides high withstand voltage analysis
Hipot Analyzer
Model 19055/19055-C
- Hipot test
ACW 5kV/100mA
DCW 6kV/25mA - Insulation Resistance test
5kVmax
1MΩ~50GΩ - 500VA output
Ground Bond Tester
Ground Bond Tester
Model 19572
- High current ground continuity testing up to 45Amps
- Resistance measurements from 0.1mΩ up to 510mΩ
- Compatible with the 19070 series Hi-pot Tester
Electrical Safety Analyzer
Model 19032/19032-P
- 5 In 1 (ACV/DCV/ IR/GB/LC Test)
- 500VA Power Rating
- Twin-Port function
- Open / Short Check(OSC)
Electrical Safety Test Scanner
Electrical Safety Test Scanner
Model 19200
- Support Electrical Safety Test
- Support High/Low voltage circuit insulation
- Max.8 units for multiple scanners
Impulse Winding Tester
Surge Tester
Model 19311 Series
- Max. output voltage: 6kV (Depends on DUT's capacitance)
- Pulse interval: 30ms - 3000ms
- 8 types of judgements
Impulsing Winding Tester
Model 19305 Series
- High impulse test sampling rate (200MHz),10bits
- 6kV impulse voltage test
- Breakdown voltage analysis function
- High speed test
Impulse Winding Tester
Model 19301A
- Wide range inductance test application(0.1uH~1mH).
- Impulse Winding Test high sampling rate(200MHz).
- Contact check & test voltage compensation by measured inductance.
- B.D.V function(BreakDown Voltage test)
Automatic Test System (ATS)
Medical Electrical Safety ATS
Model 8910
- Support electrical safety test and function test scanning
- Support customize function test (option)
- Open architecture software
High Capacitance Electrolytic Capacitor ATS
Model 1911
- Test parameter LC/C/D
- Test 8 electrolytic capacitors
- Constant current for test leakage current
Electrical Equipment ATS
Model 8900
- Open architecture software
- Expandable hardware
Motor Test Solutions
Wound Component EST Analyzer
Model 19036
- 5 in 1 composite analyzer scanner (ACW/DCW/IR/IWT/DCR)
- Hi-pot test (5kVac / 6kVdc, HSCC, 500 VA output)
- 5kV Insulation Resistance test (IR)
- Impulse Winding Test (IWT)
Hipot Analyzer
Model 19055/19055-C
- Hipot test
ACW 5kV/100mA
DCW 6kV/25mA - Insulation Resistance test
5kVmax
1MΩ~50GΩ - 500VA output
- ↑