-
SubscriptionSubscription
We will irregular release Chroma solutions, technics, exhibitions, seminar and webinar news. Subscribe today to get more information.
-
0Inquiry Cart
Quick Menu
Power Electronic Component Automatic Test System
Power Conversion System (PCS) ATS
Model 8000
Power Conversion Systems (PCS) are devices connected between the battery system and the grid to achieve bidirectional energy conversion. The Chroma 8000 ATS is a customizable system designed specifically for automated testing and verification of PCS. With the 8000 ATS as a base and equipped with the Chroma 61800, 62000D, and 17040 grid/battery simulators and measurement instruments, this versatile platform can perform PCS grid-connected testing, PCS performance testing, PCS output/input characteristic testing, PCS protection characteristic testing, and photovoltaic characteristic testing. These tests meet the preliminary testing requirements of IEC62933, Chinese national standards GB/T34120 and GB/T34133, Korean standard SGSF-04-2012-07, and the German low-voltage grid connection standard VDE-AR-N 4105. Users only need to confirm the required test conditions and specifications, and the optimized PCS ATS is ready to perform automated PCS testing.
Battery Simulator
Bidirectional DC Power Supply
Model 62000D Series
- 2 in 1 Bidirectional DC Power Supply + Regenerative Load
- Rating: Voltage 0-2000V, Current up to 540A, Power up to 540kW
- PV, Battery, Fuel Cell simulation
- Dual output ranges in one-click switching (62000D-HL models)
16CH Battery Cell Simulator
Model 87001
- Operating mode: CC/CP
- Channel power: 25W, Channel voltage: 5V, Channel current: 5A (parallelable)
- Bidirectional power supply design
- 480-cell battery pack voltage simulation ability (240 cells in series and 2 cells in parallel)
Battery Simulator
Model 17020/17040
- Multichannel battery packs state simulation
- Ability to follow the battery cell curve behavior to simulate battery state
- Ability to set frequently used parameters for battery pack and rapidly customize initial output state
- Allows for smooth and rapid current charge and discharge switching without interruption for bidirectional components
Battery Pack/ Module Test System
Regenerative Battery Pack Test System
Model 17020C
- 150V 100A output operating range, 0V discharge functionality
- Flexible configuration of test channels; Versatile programming functionality; Intuitive user interface
- High-precision current/voltage measurement; Seamless switching between charging and discharging; Stable and uninterrupted current
- Suitable for battery module/pack design validation, production test, product certification
Regenerative Battery Pack Test System
Model 17040E
- High-power testing equipment up to Voltage:1700V/850V, Current:400A/600A, Power:Up to 1.6MW/Up to 2.4MW
- Multiple safety protections for personnel safety risk management and control of battery testing
- Flexible Integration for automated battery verification solutions
Regenerative Battery Pack Test System
Model 17040
- Voltage range: 60~1000V, Current range : 0~1500A, Power range : 0~600kW
- High accuracy current/voltage measurement (±0.05%FS / ±0.02%FS)
- Multiple voltage / current ranges for auto ranging function
- Meets international standards for battery testing: IEC, ISO, UL, and GB/T, etc.
Regenerative Battery Pack Test System
Model 17020
- Voltage 20V/60V/100V/200V/500V for EV, storage battery pack/module test
- Max 60 independant channels, parallel for high current
Regenerative Battery Pack Test System
Model 17020E
- Charge/discharge modes (CC, CV, CP)
- Power: 10kW, 20kW per channel (Up to 80kW by parallel)
- Voltage: 60V,100V, 200V
- Current: 180A, 100A per channel (Up to 800A by parallel)
Battery Pack EOL ATS
Model 8720
- Specifically designed for battery production line, or battery development testing
- Increases QA efficiency by up to 80%
- Inspection of BMS functions, connector withstand voltage, consistency, and performance of battery module
- Charge/discharge power range: 5kW ~ 350kW
- Charge/discharge voltage/current range: 0V~900V/0A~1000A
BMS Power HIL Testbed
Model 8630
- Integrated real-time system and fault injection unit for comprehensive ISO26262
- Up to 1200V/900A battery module simulation voltage and current, actual verification and calibration of SOC, SOH and other BMS parameters
- Test BMS protection mechanisms for OVP, UVP, OCP, OTP or UTP under static or dynamic conditions
- Supports CAN, CAN FD, LIN, and RS-485 interfaces
Power Electronics Test Instruments
Regenerative DC Electronic Load
Model 63700 Series
- Rated power: 6kW, 12kW, 18kW
- Voltage range: 100V, 600V, 1,200V, 1,800V
- Energy recovery efficiency: Up to 93%
- Intelligent fan control
Regenerative AC Electronic Load
Model 63800R Series
- Rated power: 9kVA, 12kVA, 15kVA
- Voltage range: 30Vrms~350Vrms
- Accept reverse rated apparent power with 89% efficiency regenerative conversion to grid
- Suitable for EVSE, Off-Grid PV inverter, and UPS product test applications
Bidirectional DC Power Supply
Model 62000D Series
- 2 in 1 Bidirectional DC Power Supply + Regenerative Load
- Rating: Voltage 0-2000V, Current up to 540A, Power up to 540kW
- PV, Battery, Fuel Cell simulation
- Dual output ranges in one-click switching (62000D-HL models)
Regenerative Grid Simulator
Model 61809/61812/61815
- Output power rating: 9kVA~15kVA
- Output voltage: 0~350V
- High Power Density 15kVA in 3UH
- Intuitive Touch Panel Interface
AC and DC Electronic Load
Model 63800 Series
- Power rating: 1800W, 3600W, 4500W
- Parallel/3-Phase function (AC mode only)
- Constant & Rectified load modes for AC loading
- CC, CR, CV, CP for DC loading
Solar Array Simulator
Model 62000H-S Series
- High-voltage 1800V for string PV inverter test solution
- 5kW/10kW/15kW/18kW up to 1MW
- Fast Transient Response Solar Array Simulation
- Build-in dynamic MPPT test profile of EN50530/Sandia/CGC-GF004/CGC/GF035/NB-T32004
Regenerative Grid Simulator
Model 61830/61845/61860/61800-100/61800-100(800VLN)
- Output power rating: 30kVA~60kVA max. 300kVA (Parallel connect up to 5 units)
- Three phase output voltage 0~300V/30Hz~100Hz
- Full 4-quadrant with regenerative capability
- Capable of Power Line Distortion simulation
Electrical Safety Testing
Partial Discharge Tester
Model 19501-K
- Built-in Hipot test and PD detector function in one instrument
- Programmable voltage output: 0.1KVac~10KVac
- PD (Partial Discharge) detection range: 1 pC~2000 pC
- High accuracy and resolution current meter: 0.01uA~300uA
Partial Discharge Tester
Model 19501
- Separate design for AC high voltage output with PD measurement and mainframe
- Built-in regulation test methods
- 3-stage voltage testing method
- PD failure count setting (1-10)
- Application: IGBT, SiC-MOSFET, photocoupler, digital isolator, isolated control IC, isolated D/D power, small/large transformer, motor.
Electrical Safety Analyzer
Model 19032/19032-P
- 5 In 1 (ACV/DCV/ IR/GB/LC Test)
- 500VA Power Rating
- Twin-Port function
- Open / Short Check(OSC)
Hipot Analyzer
Model 19055/19055-C
- Hipot test
ACW 5kV/100mA
DCW 6kV/25mA - Insulation Resistance test
5kVmax
1MΩ~50GΩ - 500VA output
Electrical Equipment ATS
Model 8900
- Open architecture software
- Expandable hardware
- ↑