Burn-in, Reliability & Life Test
Chroma 58605 is a high density, multi-function, and temperature-controlled module based system for laser diode burn-in and lifetime tests. Each module has up to 128 SMU channels which can source current and measure voltage in various control modes as described below. The system can accommodate 6 modules for a total of 768 SMU channels.
Auto Current Control Mode (ACC)
In auto current control (ACC) mode, the control circuit will provide the preset current to each laser diode with high stability. Even with fluctuations in device resistance and temperature, the current will be kept constant during the burn-in process. The device voltage will be recorded as a uality reference parameter.
Auto Power Control Mode (APC)
With feedback signal from the optional external Photo Diode PCB or the onboard Monitor Photo Diode (MPD), the control circuit can adjust the laser diode current automatically to keep a constant optical power output over the test period. The device voltage and current are recorded as quality parameters for reference.
Temperature Control
A proprietary designed heat plate will control the laser diode case temperature with high accuracy, excellent stability, and good uniformity. This thermal condition approach is much more compact, easier to operate, offers better performance, and energy saving over chamber-based systems. Customers gain the benefit of a small footprint, versatile usage, and easy maintenance.
Independent Module Operation
Customers can set each module to a set test program varying from all other modules in the system. Variation includes all parameters including temperatures, Control Modes (APC/ACC), start times and test durations. These modules can test a variation of CoS, CoC, and TO-Can packages allowing for multiple device types in one system. This provides the highest flexibility in operation.
Protection and Individual Channel Shutdown
The control circuit is specially designed for protecting each laser diode. No in-rush current or voltage will occur to damage the devices. High/Low limits of current and voltage can be set to perform shutdown protection. If a device abnormality occurs, only the affected channel will be shut down while others continue running normally. To ensure device safety, ESD protection is also sustained in the system design.
Auto Data Recovery after Communication Interruption
The measurement data is stored in the system IPC and optionally in remote servers. If the communication between the module and IPC is temporarily interrupted, the data will be buffered in the module 6 hours or more. After the communication is restored, the buffered data will be uploaded to the IPC/server without loss.
